Jailbreak 4.3.5 iPhone 4, 3GS, iPod Touch 4G, 3G, iPad with Redsn0w [Tutorial]

By  at Monday, July 25, 2011  

As you know that Apple has released iOS 4.3.5 to fix security issue. The good news is that some guys have confirmed that current Redsn0w version can jailbreak 4.3.5 iPhone 4, 3GS, iPod Touch 4G, 3G, iPad 1.

As we reported you that this jailbreak is still tethered jailbreak which means that you will need to reconnect your iDevice with computer every time your reboot iDevice.

Jailbreak 4.3.5 iPhone 4, 3GS, iPod Touch 4G, 3G, iPad:

Required Downloads :
  • Download iOS 4.3.5 for iPhone 4, 3GS, iPod touch and iPad
  • Download iOS 4.3.4 for iPhone 4, 3GS, iPad, iPod touch
  • Download Redsn0w 0.9.9b4 for Windows
  • Download Redsn0w 0.9.9b4 for Mac
  • Download iTunes 10.4 for Windows & Mac
Step 1: Connect your iDevice with your PC via USB, and open iTunes 10.4 then Restore to iOS 4.3.5 if you don't already have it on your device

Step 2: Start Redsn0w, press on "Extras > Select IPSW" and point it to iOS 4.3.5 firmware ipsw file.



Step 3: Now select “Install Cydia” and click “Next”. Optionally (if available), you can also select any other option you like.
Step 4: Now make sure your device is both OFF and PLUGGED IN to the computer before you click “Next”.
At this stage you will be presented with a screen where you will be guided on how to enter DFU mode. Quickly hold “Power” button and then while holding the “Power” button, you will now have to hold “Home” button too. Now after few seconds release “Power” button but keep holding “Home” button until installation begins.

Step 5: Wait until you get iOS 4.3.5  jailbroken in few minutes. Congratulations.


Tethered Jailbreak : Once current Redsn0w jailbreak is still tethered jailbreak, you will be required to connect your iOS device with your computer and run Redsn0w again then choose "Just boot tethered right now".

Jailbreak 4.3.5 iPhone 4, 3GS, iPod Touch 4G, 3G, iPad with Redsn0w [Video Guide]:


If you are seeking for iPad 2 jailbreak on iOS 4.3.5 - Click Here.

If you found this post useful, dont forget to click the +1 button =>
Recommend on Google

 

Follow Limera1n on Google+

Related Posts Plugin for WordPress, Blogger...

55 comments:

Jake_Castillo said...

im trying to do it for iPad 2 and its not working!

gonberisha said...

Does it save the baseband??

Anonymous said...

Is there going to be an untethered jailbreak for 4.2.10?

Anonymous said...

you can only jailbreak iPad 2 IOS 4.3.3 whit jailbreakme theres no jailbreak to IOS 4.3.5 for iPad 2

Anonymous said...

My iPhone 3Gs 8gb, open the cydia but Hackulos dont work. whats wrong?

Bea said...

Iphone 4 - it worked! Thanks

Anonymous said...

you say 4.3.5 then change to 4.3.4?

hope494 said...

can this work if i have 4.2.1 ipsw file and am currenly using 4.3.5??

Anonymous said...

It worked on my iPod touch 3G!!!! thanks(:

João Paulo said...

I try do it on my Apple iPhone 4 and isn't work!

Anonymous said...

works in iPad 1??

akatzbreaker said...

I jailbroke it and I got No Service...

My baseband is 4.10.01 so the ultrasn0w fixer doesn't work....


What should I do?

Anonymous said...

Works Perfect!!! Trabaja perfecto. despues de instalar el ios 4.3.5(8L1) desde itunes es que despues de instalar una aplicacion para crackear el programa pdanet my iphone se ciclo en la manzanita y nunca mas quiso iniciar entonces lo restaure desde itunes pero me actualizo el ios pero este tuto me ayudo a hacer el jailbreka en mi iphone aun que es tethered funciona muy bien tengo cydia de nuevo y mejor compre el pdanet. Gracias.. thanks a lot !!!!!! limera1n

Anonymous said...

You're doing it wrong

Anonymous said...

install successful. However when install activator and get stuck in reboot state. any one have same problem ????

Anonymous said...

i got no pwnage file when i downloaded redsnow help me!

Anonymous said...

I tried it on iphone 3GS, Cydia does not open!

Anonymous said...

Cydia and Safari doenst work after this Jailbreak.
Don't use this.

ant g said...

can somebody please tell me why i have cydia fully downloaded and it wont let me installl any programs it says it does but no icons show up after i install them! HELP!!!!!!!!!!!!!!!!!!!!

Anonymous said...

getting unrecognized ipsw when i try using redsn0w. 0.9.8b4 trying to jailbreak 4.3.5. help? iphone 3gs mb717ll

Anonymous said...

It works only for the next reboot!!! You have to do the same procedures with "Just boot tethered right now" via redsn0w after turning off the iPhone. And what's bad it couldn't be unlocked!!!
Some ideas how could it be unlocked?

Anonymous said...

im getting unrecognized ipsw when i try using redsn0w. 0.9.8b4 trying to jailbreak 4.3.5. ipad 1

Anonymous said...

what is the possibility of untethered jailbreak 4.3.5

Anonymous said...

help, i did both redsnow steps, now i just get the pineapple logo

Anonymous said...

Hi I have a 3GS on 4.3.5 with 06.15.00 Base band the device is unlocked with redsnow. The problem i have is I have lost all mobile phone operation mobile network not displayed,either 1 dot on the signal bar or NO SIGNAL. Someone out there MUST have a work around for this, please, please can you help. I'm totally lost without 3G mobile connection.

Many Thanks in advance

Anonymous said...

More likely than not, there will be no untethered 4.3.5
The hackers will probably wait for iOS 5.

Anonymous said...

anybody know how to fix the thing where safari dosesnt open after jailbtreak?

Anonymous said...

untethered or tethered?

Gosu said...

does this work on ipad 2 wifi + 3g 4.3.5 8Li?

Abhijeet said...

hey i just did jailbreak...but when i turn my phone off it hang or some what lock...
any solution???

Anonymous said...

I'm only hoping that limera1n releases it's own clean jailbreaker for this bloody update. Jailbroke using redsn0w, got cyndia installed had problems with it launching, so I run redsn0w on tether. No problems running cyndia, then the phone was acting funny so I shut it down. And the phone froze to a point it wouldn't boot, so I pressed the home button and the power button with little luck. Next I found iREB by iH8snow and got things running so I could restore back to how I had it before with iTunes. Luckily I back up my iPhone often on my PC, I was clenching that I didn't loose everything. Hurry up and release a proper crack! and thats with a please ;)

Anonymous said...

i tired it on my 3gs and everything seemed alright yet when it finished installing all the packages , the iphone would just not reboot !!! it'd take forever and won't work !!!! i tried pressing both the power and home buttons together but still when it tries to reboots and will stuck in that black screen with the apple logo !!!! also i tried restoring the iphone and re-doing the process once again , but same thing !!!

Anonymous Contractor said...

Also getting unrecognized ipsw when i try using redsn0w. 0.9.8b4 trying to jailbreak 4.3.5

Anonymous said...

the redsnow didn't recognize the ios 4.3.5 or 4.3.4

mohammdmf said...

i hava prablem


unable to recognize specified IPSW

Anonymous said...

IT IS A UNTHERTET FOR 4.3.5????????????

revin said...

when would untethered for 4.3.5 release??? its really bored to use iPhones whitout a full jailbreak....

pythonsnake said...

hi i have a iphone 4 with 4.3.5 and tried to jailbreak when i try to jailbreak my i phone 4.3.5 using redsnow b6 or b7 i get stuck on ( expolpiting with limera 1n ).what should i do?

Anonymous said...

hey i didn't get a pwnage folder

Anonymous said...

heres an idea show an instruction thing for windows because either im missing something or the steps are completly different from the mac

LordTardus said...

All of you having problem booting:
IT IS A TETHERED JAILBREAK!

Meaning that as for now you *can't* start up your iDevice without a computer and iBooty or whatever software.

You shouldn't complain but be glad these people actually take time to create these "cracks" for you with almost no benefits for themselves what so ever.

/LordTards from Sweden

Anonymous said...

For iPhone 3GS 16GB Cydia doesn't launch, it says preparing filesystem and loops forever. When I connect the iPhone to PC it says its 28GB..!!. Since its 16GB it should have said around 12GB. Now Cydia is not working. Any workarounds for this?

Anonymous said...

I have a Jail broken 3gs with new bootrom (baseband 06.15.00), itunes updated to 4.3.5 firmware!&&$*! So I restored using redsn0w ‘deactivate’ & ‘deactivate+cydia’ now I’m stuck with screen with emergency number calling only. How can get past this to cydia to get to ultrasn0w if I am stuck at the emergency screen??? Any help/solution appreciated..

Anonymous said...

Tutto bene ragazzi funziona alla perfezzione , io ho ipad 1 aggiornato per sbaglio dalla vecchia ios alla versione 4.3.5 , paranoico , ho fatto tutto quello trascritto in questo forum , e mi funziona tutto alla perfezione , l'unico difetto e che non si deve mai spegnere ipad , perche si deve riavviare nuovamente come le procedure skritte in tethered , ho installato installous tramite cidya e kredetemi . Ho dei giochi fantastici .... Francesco T. Palermo .... Spero che esca presto una novitaa .. Ciao a tutti ..

Anonymous said...

Cydia and Safari doenst work after this Jailbreak... Can any body please help?

Anonymous said...

allbullshit, ipad 2 3G cannot be downgraged by all means unfortunately!

NickDP said...

Afraid my iphone 4 isent working either, getting the 1600 error, then making a custom file with Sn0wBreeze, installing that, and then ifaith doesent work.

Guess that's it for people with the 1600 error :/

Anonymous said...

After almost 10 hours I'm totally tired of trying that! I have an iPad 1 3G 64GB and it was with 4.2.1, but I actualized it and now it's with 4.3.5. I've been trying to downgrade it but I ALWAYS get ALL the errors mentioned at the post! I got 3194, 1600, 1604, 20, and finally 37, the one that I couldn't get over. I tryied to use a snowbreeze custom version and the oficial version of 4.3.3 and tryied even the iFaith and iRecovery but didn't work, iTunes keeps teling me there's the 37 unknown error. Ans my ipad was on a boot loop. So I restored it to 4.3.5 again and that's it =/ If anyone can help I'll live it! Thanks, Felipe

Anonymous said...

Why the F do we need to download and restore 4.3.5 firmware when we are trying to jailbreak, this is counter intuitive

Nemestis said...

Worked but not on a first try, for those who are expericing problems try this:

On the first attempt, dont check anything (not even install cydia or boot tetherd) just let it cleanly go without any chekcbox checked, after install it will stuck on a logo, enter manually in dfu mode (hold power and home, then only home), start again redsnOw and check boot tethered only, it will boot and here you go!!

This is my solution which solved my problem.

Michael Ip said...

Hello all!

I just had a huge problem with attempting to tether JB 4.3.5 with redsn0w.

After the jailbreak, my brand new Itunes 10.4.1 could no longer read the iphone! In fact the itunes tends to crash repeatedly.

For anyone else that came across this issue, my fix is to downgrade to Itunes 10.3, and everything works perfectly!

To acquire the 10.3 install files just search it up on the apple website.

You will also need to change your "Itunes library.itl" file which you can find guides for easily.

Anonymous said...

Just open redsnow and upgarde your ipsw after that chosse ""- juste roobt untherder and follow the reste ....

Anonymous said...

You can’t downgrade to an iOS that you don’t have SHSH blobs for and expect to get an untethered boot. Blogs are claiming they found a way. Well… the bootrom explicitly looks for SHSH blobs upon boot. So if they aren’t there… it’ll just go into a DFU loop. When you can write to read-only memory.

Anonymous said...

Ocurred the error 3194 whats this?

Anonymous said...

if i already have 4.3.5, i have to reinstall a 4.3.5 and what to do with 4.3.4? Please state clearly, this is not a tutorial...

Post a Comment