By at Friday, May 06, 2011
This is very fast. Dev team has just released new version of Redsn0w 0.9.6rc15 0.9.6rc16 to bring untethered jailbreak for iOS 4.3.3 on iPhone 4, iPhone 3GS, iPod touch 4G, iPod touch 3G and iPad. iOS 4.3.3 untethered jailbreak is based on i0n1c's untethered exploit.
Here's step by step guide showing you how to jailbreak iOS 4.3.3 untethered using Redsn0w0.9.6rc15 0.9.6rc16 (Win / Mac)
Step 1: Download iOS 4.3.3 for iPhone, iPad or iPod touch (download links at the end).
Step 2: Restore to iOS 4.3.3 in case you haven't yet using the IPSW file you just downloaded via iTunes 10.2.2.
Step 3: Start Redsn0w and point it to the official iOS 4.3.3 firmware file.
Step 4: Now select “Install Cydia” and click “Next”. Optionally (if available), you can also select any other option you like.
Step 5: Now make sure your device is both OFF and PLUGGED IN to the computer before you click “Next”.
At this stage you will be presented with a screen where you will be guided on how to enter DFU mode. Quickly hold “Power” button and then while holding the “Power” button, you will now have to hold “Home” button too. Now after few seconds release “Power” button but keep holding “Home” button until installation begins.
Step 6: Wait until you get untethered iOS 4.3.3 jailbroken in few minutes.
Note: If you rely on ultrasn0w unlock don't follow this guide, you have to follow This Guide (PwnageTool 4.3.3.1) or This Guide (Sn0wbreeze 2.7.1) to preserve your old baseband to unlock with ultrasn0w
Here's full video tutorial, enjoy :
Download Redsn0w 0.9.6rc15 for Windows
Download Redsn0w 0.9.6rc15 for Mac
Download Redsn0w 0.9.6rc16 for Windows
Download Redsn0w 0.9.6rc16 for Mac
Download iOS 4.3.3 for iPhone, iPod touch, iPad
Download iTunes 10.2.2
Common Errors:
Here's step by step guide showing you how to jailbreak iOS 4.3.3 untethered using Redsn0w
Step 1: Download iOS 4.3.3 for iPhone, iPad or iPod touch (download links at the end).
Step 2: Restore to iOS 4.3.3 in case you haven't yet using the IPSW file you just downloaded via iTunes 10.2.2.
Step 3: Start Redsn0w and point it to the official iOS 4.3.3 firmware file.
Step 4: Now select “Install Cydia” and click “Next”. Optionally (if available), you can also select any other option you like.
Step 5: Now make sure your device is both OFF and PLUGGED IN to the computer before you click “Next”.
At this stage you will be presented with a screen where you will be guided on how to enter DFU mode. Quickly hold “Power” button and then while holding the “Power” button, you will now have to hold “Home” button too. Now after few seconds release “Power” button but keep holding “Home” button until installation begins.
Step 6: Wait until you get untethered iOS 4.3.3 jailbroken in few minutes.
Note: If you rely on ultrasn0w unlock don't follow this guide, you have to follow This Guide (PwnageTool 4.3.3.1) or This Guide (Sn0wbreeze 2.7.1) to preserve your old baseband to unlock with ultrasn0w
Here's full video tutorial, enjoy :
Download Redsn0w 0.9.6rc16 for Windows
Download Redsn0w 0.9.6rc16 for Mac
Download iOS 4.3.3 for iPhone, iPod touch, iPad
Download iTunes 10.2.2
Common Errors:
- If you get 3194, 1600, 1602, 1013, 1015, 20 errors, you can fix it - Click Here.
- If you get 1611 error, you can fix it - Click Here.
If you found this post useful, dont forget to click the +1 button =>
Recommend on Google







111 comments:
Oyeah!
And when we see unlock tool ???
any iphone4 success jb on this ?
Funny to name all generations of iPhones but nothing is mentioned about the iPad.
So my question is, will this also work on iPad 2?
my iphone4 successed
Is it possible to enable Multi-Touch gestures on this one?
Does this work for ipod touch 4th generation 4.3.3? And could i download installous after i jailbreak redsnow?
I am getting a white cydia icon after jailbreaking and it wont open. What can I do about this?
JB just fine on iphone 4... ipad1 doesn't see to work get usb errors while its trying to exploiting with limera1n and just sits there...
no not for ipad 2 works on iphone 4 flawlessy
Iphone4 unlock, successfully jb with ios4.3.3. TQ DEV Team.
Make certain you let iTunes upgrade you to 4.3.3 if you are not already. I was on 4.2.something and while I kept an eye on the instructions I thought I had bricked my 3GS. Thankfully I was capable to restore in iTunes
i just JBd my iPhone 3GS. Cydia doesn't work now. the icon's white and when i press it crashes. help? anyone?
worked great!!!
Does it jailbreak my iPad 2, 4.3.2?
" Kozie said...
Funny to name all generations of iPhones but nothing is mentioned about the iPad.
So my question is, will this also work on iPad 2? "
No
redsn0w crashes while downloading the JB firmware on my ipod touch 4, and the whole process stops. whats the problem
worked on my iphone 4 very easily...thx
Okay just downloaded the iOs 4.3.3 and jailbroken with by following the instructions ... working
Chirag Mumbai
I have tethered jailbroken iphone 3gs(new bootrom) with IOS 4.2.1 and Base Band 6.15. Will this work for my phone? If not what should i do as i can not restore it back using itunes.Is custom firmware the only option i am left with?
Cydia icon is blank and when I want to enter, it doesn't let me open it
good jailbreak for iPod 4 in ver 4.3.3
Thank you guys. Simple and effective. Love it
did all the steps when the iphone4 restarted i dont see cydnia on the iphone.
EDIT:nvm found it lol idiot me
Can't get into DFU
redsn0w unable to recoginise the IPSW file can anyone help..??
Sucess! good job guys! thanks a lot!Iphone 4 4.3.3 DONE! =D
I've jailbroke my iphone 4 with this tool and i still have not cell network - only cydia icon. Does modem version means for jailbrake (i have 4.10.1)?.
Will this delete all my apps/settings?
Many thanks guys.. You keep iPhone alive..
Hi guys! thanx for everything. i just wanna know if its unlocked sim card also or not i donwloaded ultrasn0w also but still sim card doesnt work any idea pls help. thanx
cant get into DFU too. any idea guys?
So I did exactly that, and now I get an arrow with 'iTunes' and a usb connector on my screen. Can't do anything, what went wrong?
i got a problem that redsnow cant identified the ipsw file too... any suggestion anyone?
tried 5 different times. always freezes on the apple logo screen.
what I am doing wrong
Redsn0w Crashes in Windows – For Windows users who run into problems with redsn0w crashing, you need to set the CPU affinity to 1. Run redsn0w and then hit Control+ALT+DEL to bring up the task manager, select and right-click on Redsn0w.exe, go to “Set Affinity” and check the box next to CPU1. Now proceed as usual.
Will this work for a 2nd gen ipod touch
thanks.
I had trouble getting into DFU mode when I did select the ipsw to restore with first in itunes.
the whole thing stopped when it came to rebooting
whats the problem?
is it necessary step 2????? can I just update normally via itunes??
i downloaded the ios but when i extract it it doesnt contain the ipsw file
when i try to download the redsnow on my laptop which is a windows use it tells me i have to buy winzip is there a way around this or do i have to bu it? i have an iphone 4 with the 4.3.3 version
Can you use this even if you do not update SW through itunes / but already have an updated 4.3.3 ?
guys if you get white cydia icon... run redSnow agian and select "just boot tethred now" and click next..should be done !! GOOD LUCK
Thanks buddy, you save my life!!
i keep getting an error message saying "unexpected during preperation"
redsnow cannot read the ios ??? why is that ??
trying this in a few minutes..with my Iphone 4..i will be updating to 4.3.3 through Itunes
If the above does not work for you, then open Cydia and install Cydelete (this should be the first thing you install anyway). For me once I did that the Cydia icon appeared properly.
THE BEST METHOD EVER!
I did it in 2 iPhones 3GS (less than 30 minutes both!!)
Perfect! Thx!
Hurra It works well. First u restore/update your ipod touch to 4.3.3 from itunes. Then download the iOS 4.3.3 for iPhone, iPad or iPod touch (download links at the end). Then run Redsn0w 0.9.6rc16 and there u browse and select the custom IPSW file u download from this link (http://www.limera1n.cc/2011/05/ios-433-firmware-ipsw-download-iphone.html). then follow the steps.
Finally install Appsync 4+ to sync cracked apps to your iphone
Enjoy. And Thanks Limera1n. U Rocks!!!
mates i jailbroke my iphone4 but after jailbreaking i have network problem.it says no service.
I did everything but when ever i open the file it say's unable to reconize specifice IPSW?? now what?
I'm glad that 586 people like this, but I do not believe that I am simply unable to follow the instructions provided. I ran into problem the first step.
When I tried restoring to "iPhone2,1_4.3.3_8J2_Restore" which is the linked file for iPhone 3GS, it extracts but says "The iPhone 'X' could not be restored. This device isn't eligible for the requested build." as it tried to verify the restore with Apple.
I also tried with the "iPhone3,1_4.3.3_8J2_Restore" file because, intuitively, that would be the correct one based on the little prior experience I had with a jailbreak attempt earlier, but it just doesn't work and give me "The iPhone 'X' could not be restored because the firmware file is not compatible." straight away.
Any help please?
That was a great Job Instruction Vid...
Thanks
Still not getting Cydia icon to look normal (is white). Tried breaking tethered per above. Can't open Cydia.
Any other suggestions?
sorry but my iPad 2 was not successful... if any one have any solution let me known,,,, thx,,,,,
for some reason the red snow link does not work (im using a mac) please help
Has anyone tested jb on ipad 1 iOS 4.3.3?
ok i have verizon 4.2.8 what do you guys suggest???
HELP plz, i did it and jailbroken my iphone 4 but i cant upload cracked games nor apps, did i performed wrongly the jailbreak?
plz answer!
uthopik182@yahoo.com
Will it work on my ipod touch 4g 4.3.3?
if your cydia is white, i heard you need to reboot
Hi Steven,
Thanks very much for your hard work. This works for me. You're right that it is a straight j/b, it wasn't too bad at all.
Thanks for this! Just jailbroke my iphone 3gs, but the cydia icon is white and won't open like others have mentioned. Tried just turning it off and back on, then tried the just boot tethered from above, but still no luck. Any other ideas?
Already on 4.3.3. Will these delete settings, media, and apps?
doesnt work. i just have a white cydia icon that doesnt do anything and now my safari app wont work
Is there any fix for iPhone battery life issue after jailbreaking on iOS 4.3.3? My iPhone battery drains faster than normal. Other communities have also experienced the same issue after they upgrade to this version regardless of they jailbroke thier iPhones or not.
White cydia icon fix:- Use reddsn0w for pown DFU mode only, after restore ios in iTune JB with Greenpos1on.
Cydia work great
Worked perfect first time. Thank you!! If u cant get it to work find someone that knows what they are doing
how do I unlock IPhone 4 white, iOS 4.3.3 with baseband 4.10.01.
Do I have to have iTunes v10.2.2 or can I use the current v10.3.1?
any possible issues with iphone4 white?
I did the jailbreak successfully on an iphone 4, but when I try for my 3gs I simply can't get it into DFU mode.
Do i NEED to RESTORE my ipod to 4.3.3 or can I leave all my stuff on it and jailbreak it, because it's already at 4.3.3
iPod.app is crashing back to home screen :(
How do I unlock my iPhone 4 I already jailbreak it
after a jailbreak with my ipod 4g 4.3.3 the screen start flickering, any ways to solve this?
I'm having trouble with the recognition of the IPSW-file.
works great!!!
Thank you so much for taking the time 2 make & post this video. After I watched it 2 or 3 times I was able 2 get all the steps down. After that it was a very easy jailbreak!!! I bought my iPod 4g two days ago and haven't found a working jb for the 4.3.3 firmware until now. You are the MAN Thank You!!!!!!
Thank you so much, your video helped me do it all by myself, without my husband's help....lol
worked like a charm on my iPhone 4, cheers mate!
Hi Guys, I have jailbreak my ipad1 run 4.3.3 but after that when i slide to turn it off and then urn it on it's system crash also when try to open settings it's reboot it's self why? Have any one try j/b 4.3.3 on ipad? please any suggestion. Thanks
can this work with itunes 10.2.2.12?
there is no jailbreak for ipad 2 i searched all over the net
I tried JB thrice and I can't get thru DFU on my 3GS. Please advice... :(
This ->I tried JB thrice and I can't get thru DFU on my 3GS. Please advice... :(
I updated to 4.3.3 yesterday with Itunes 10.3.1.55
Firmware version 4.3.3 (8J2)
Baseband: 04.10.01
New Bootrom version
I also tried the lates version of redsn0w (RC18) without luck.
Redsnow starts exploiding limera1n, and gets no further and phone enters usb -> itunes logo.
FINALLY !!!
if i jailbreak my iphone 4 this way will i lose my apps n music?
why my cydia logo is blank?? The problem is i got no problem logging in.. =/
my iphone 4 is stuck on the apple logo when its restarting!!!..... what do i do?.......
PLEASE HELP! the very first step when you click 'install cydia' my page only has the browse button avaliable to click and it takes me to my pictures and documents saved on my computer. please help(:
p.s. im trying to jailbreak my ipod touch 4th generation 8gig
Hi, I have an Iphone 3Gs which is running IOS 4.3.4. I’ve tried the latest redsnow 0.9.6rc16 and all seems to go well. The hard drive screen displays and then a lot of code on a black background, then finally the pineapple logo and loading bar. Then everything seems to finish happily and it reboots…straight back into the Apple logo, and at this point Itunes sees the Ipod and I have to restore and update again. Is there any way around this? Sadly I’m unable to downgrade the firmware either as I have no blobs and therefore receive the Itunes error 1394.
thank you so much! it's working! Now i can install games and apps in my ipod :)
Uhh, after the first step, i dont know what to do.. What do I select or click or what ever?
Sick boy!!! Works perfect!!!
Should there be any issues on win7 64 bit..?
please help ive done installing eveerything but when it reboot it says i have to connect the iphone cable to itune
White cydia= Tethered jailbreak. select booth tethered form the menu.
After going into Cydia or downloading an APP, I was not able to use the Home button to get out. What happened ?
Hi,
Thanks for sharing such grateful blog post. I really happy with reading your blog post. keep it up regular manner post.
Jailbreak iphone 4.1
can i use the new version of itune?
My Current Firmware is iOS4.3.3 signed IPSW from iFaith.
Should I restore to apple iOS4.3.3 IPSW first and then do Jailbreak with RedSn0w ? or I can just Jailbreak and browse to iOS4.3.3 Signed IPSW?
Please advice.
Hi, I have followed all the steps and jailbroken iphone 3gs(new bootrom) and unlocked using ultraSnow too. But, when it reboots it remains tethered. i.e I need to use redSnow to boot tethered. Not sure, why is this, I tried several times and on switchOff it gets into DFU mode. The baseband is 06.15. Any suggestions please. Thanks!
will it work to my ipod 3g with iOS 3.1.2?
Hi, i am doing Jailbreak for my iPad 2 ios 4.3.3
i am using redsnow 0.9.6rc16 i am following the written instructions above,however it stops on exploiting with limera1n and the progress bar freeze and wont allow to continue, any possible recommendation.
For the people that get a white cydia icon after installing the jailbreak, its normal it happened to me; all you need to do is reopen the redsnow-> open extras and choose "boot only"
@jimmy, that has happened to me before when i tried jailbreaking my ios 4.3.3 as well. All i can say is that i restored my iphone and then tried jailbreaking again and it worked afterwards; hopefully that could work.
I have been waiting for 40 minutes, and my phone still has not come up, it still has the white apple on screen. Does it take longer?
you are genius.thanks man.
Post a Comment