By at Tuesday, April 19, 2011
Sn0wbreeze 2.6 (aka PwnageTool for Windows) has just released to untethered jailbreak iOS 4.3.2 on iPhone 4, iPhone 3GS, iPod touch 4G, 3G and iPad via a pre-jaibreak custom firmware.
Who rely on unlock should use Sn0wbreeze not Redsn0w , Why ? Sn0wbreeze 2.6 allows you to jailbreak untethered iOS 4.3.2 with preserving old (unlockable) baseband for iPhone 4, 3GS to unlock it with the currecnt version of ultrasn0w.
Note: If you looking for jailbreak iOS 4.3.2 untethered using Redsn0w, you can follow this guide for Windows or this guide for Mac. If you looking for PwnageTool , follow this guide (PwnageTool 4.3.2)
Step 1: Start Sn0wbreeze, click the next “blue” colored arrow to proceed.
Step 2: Select the required firmware .ipsw file for your iOS device by clicking on the “Browse” button.
Step 3: Sn0wbreeze will now identify the selected IPSW file. Once done, click the next “blue” colored arrow to proceed.
Step 4: Now select the “Expert Mode”, followed by “Build IPSW” option to start creating your custom firmware.
Step 5: Sn0wbreeze will greet you with the following “Done!” message when the custom firmware has been successfully created.
Step 6: Now follow the onscreen steps to enter DFU mode using Sn0wbreeze:
If you have followed the steps correctly, you will get the following message from Snw0breeze
Step 7: Start iTunes, click on your iOS device icon from the sidebar in iTunes. Now press and hold Left “Shift” button on the keyboard and then click on “Restore” (Not “Update” or “Check for Update”) button in iTunes and then release this button.
This will make iTunes prompt you to select the location for your custom firmware 4.3.2 file. Select the required custom .ipsw file that you created above, and click on “Open”.
Step 8: Now sit back and enjoy as iTunes does the rest for you. This will involve a series of automated steps. Be patient at this stage and don’t do anything silly. Just wait while iTunes installs the new firmware 4.3.2 on your iOS device. Your iOS device screen at this point will be showing a progress bar indicating installation progress. After the installation is done, your iOS device will be jailbroken on iOS 4.3.2.
How to unlock iPhone 3GS, iPhone 4 on iOS 4.3.2:
You can follow this guide to unlock your iPhone 4, 3G running jailbroken iOS 4.3.2
Who rely on unlock should use Sn0wbreeze not Redsn0w , Why ? Sn0wbreeze 2.6 allows you to jailbreak untethered iOS 4.3.2 with preserving old (unlockable) baseband for iPhone 4, 3GS to unlock it with the currecnt version of ultrasn0w.
Note: If you looking for jailbreak iOS 4.3.2 untethered using Redsn0w, you can follow this guide for Windows or this guide for Mac. If you looking for PwnageTool , follow this guide (PwnageTool 4.3.2)
Step 1: Start Sn0wbreeze, click the next “blue” colored arrow to proceed.
Step 2: Select the required firmware .ipsw file for your iOS device by clicking on the “Browse” button.
Step 3: Sn0wbreeze will now identify the selected IPSW file. Once done, click the next “blue” colored arrow to proceed.
Step 5: Sn0wbreeze will greet you with the following “Done!” message when the custom firmware has been successfully created.
Step 6: Now follow the onscreen steps to enter DFU mode using Sn0wbreeze:
- Hold Power and Home buttons for 10 seconds
- Now release the Power button but continue holding the Home button for 10 more seconds
- You device should now be in DFU mode
If you have followed the steps correctly, you will get the following message from Snw0breeze
Step 7: Start iTunes, click on your iOS device icon from the sidebar in iTunes. Now press and hold Left “Shift” button on the keyboard and then click on “Restore” (Not “Update” or “Check for Update”) button in iTunes and then release this button.
This will make iTunes prompt you to select the location for your custom firmware 4.3.2 file. Select the required custom .ipsw file that you created above, and click on “Open”.
Step 8: Now sit back and enjoy as iTunes does the rest for you. This will involve a series of automated steps. Be patient at this stage and don’t do anything silly. Just wait while iTunes installs the new firmware 4.3.2 on your iOS device. Your iOS device screen at this point will be showing a progress bar indicating installation progress. After the installation is done, your iOS device will be jailbroken on iOS 4.3.2.
How to unlock iPhone 3GS, iPhone 4 on iOS 4.3.2:
You can follow this guide to unlock your iPhone 4, 3G running jailbroken iOS 4.3.2
Download Sn0wbreeze 2.6 for Windows.
If you found this post useful, dont forget to click the +1 button =>
23 comments:
Is it working for ipad 2?
I followed these instructions, installing the ipad baseband for my 3GS (old bootrom) and received error 1015 at the end.
tiny umbrella will not get this phone out of the restore mode.
any ideas?
bonjour, je suis en 4.1 avec bb 2.10, est ce que c'est possible de passer en 4.3.2 pour désimlocké mon iphone 4.
merci de vos lire
Does this work on iphone 3g firmware 06.15.00 nothing refers to the 3g, just iphone 4 and 3gs.
EXCELLENT! I SPENT 15 HOURS LOOKING FOR A IOS 4.3.2 JAILBREAK, SO THIS IS GREAT PALS,,, CONGRATULATIONS GREETINGS FROM MEXICO!
does this work for ipad 2?
is there alternate link to get sn0wbreeze 2.6 besides the provided link??
I’m using 3GS SU BB 05.11, I’ve follow the instruction and got error37 msg from itunes. how I fix this thing?
Thank you.
I have did everything but after install my iphone cant open, what should i do ?
I tried it but when I connect to iTunes and click on Restore and vhoose the custom built ipw as above from snowbreeze the iTunes gives me an error 21. Does anyone know what is it? ANy help will be appreciated.
Did everything as said, but when I select the custom firmware file on desktop in iTunes, it says that the firmware file is not compatible.
is this jailbreak also for ipad 2
already say its for iphone and ipod. please read
this did not work for me i got an error message 3194 and it thats after it trys verifying restore with apple so any help?
me too.. it says the same thing error msg 3194..
same problem // error 21
thanks from Algeria
itunes do not accepte the ipsw file.
Did not work for me i got an error message 3194 and verifying restore with apple so any help?
No. Its not working for iPad2 yet. D'oh
everything went well up until the shift+restore with patched ipsw was 90% finished then I got an error and cannot get the ipod to turn on, or restore.
i have iphone4 4.2.3 bb 4.10.1
4-6 times jailbreaking but nothing happen using snowbreeze 2.6.1
"the iphone could not restored an unkwon error accured"
im already updated the itunes.
i follow all the steps above.
i try simple mode, expert mode. but nothing!
Please help!
thanks..
i have iphone4 4.2.3 bb 4.10.1
4-6 times jailbreaking but nothing happen using snowbreeze 2.6.1
"the iphone could not restored an unkwon error accured"
im already updated the itunes.
i follow all the steps above.
i try simple mode, expert mode. but nothing!
Please help!!!
Post a Comment